Four Stepped Rows
Clear, tilt-out
The step between rows is set so the top row is readable from a standing position at the front edge. Four rows is where that stays true without the fixture getting deep enough to eat the aisle.
High Capacity Tilt Bin Island
Four rows of clear tilt bins on a pale timber island with both ends radiused. It sits between the standard three row build and the five row island — the arrangement most stores land on once they have counted their actual range.
Two studio angles on white. The tiers, the curved end panel, a full row of bins and the base doors are photographed below.
Product File
Four Rows, Which Is Usually The Right Number
Three rows is the safe island and five rows is the dense one. Four is where most dry goods ranges actually land, and it is the arrangement we build most often. Every row is a clear tilt bin with a ticket holder along the front lip, stepped back from the row below so the whole range is legible from where a shopper stands rather than from where the fixture was designed.
The timber here is a pale tone rather than the dark plank facing used elsewhere in this category, which changes the fixture considerably in a bright store — a pale island under retail lighting recedes and the product carries the colour. Both ends are radiused, and the base is a closed cabinet run for refill stock.
Bin rows Four, stepped
Facing Pale timber
Overall size Cut to your aisle
Carcase 0.8–1.5 mm steel
- Nearly 30 years
- Changshu, Jiangsu
- ISO 9001
- HS Code 94031000
Product Description
High Capacity Tilt Bin Island
Four rows of clear tilt bins on a pale timber island with both ends radiused. It sits between the standard three row build and the five row island — the arrangement most stores land on once they have counted their actual range.
Key Features
- Built to your drawing rather than to a fixed configuration — length, depth, height and internal layout all follow your floor plan.
- Cold rolled steel body with the finish carried across every category on the same order, to one RAL or PANTONE reference.
- Manufactured in our own plant in Changshu, where steel fabrication, woodworking and stainless steel production run on one site.
Applications
Supermarkets, convenience stores, chain retail and speciality stores. Tell us the store format and the floor area and the specification comes back written against them.
What The Photographs Show
The tiers, the curve, a full ticketed row and the refill base — the four parts that decide whether a bin island works in daily use.
Pale Curved End
Board bent to the radius
The pale board is bent around the end. In a brightly lit store this is the detail that makes the island disappear behind the product, which is the point of specifying pale timber in the first place.
Ticket Strip Along Every Row
Holders fitted, tickets supplied
Every row carries a ticket holder along its front lip, and price tickets are supplied with the order rather than left to the store. On a loose goods aisle the ticket is doing pricing and product naming at once.
Refill Cabinet Doors
Closed base, flush handles
The base under the bins is closed cabinet rather than open shelf. Refill sacks live out of sight directly under the bins they serve, which is what keeps a bulk aisle from needing a trolley parked in it.
Customisation
Every item on this page is made to order. Send a floor plan, a hand sketch or a photograph of a fixture you like, and we quote against it.
Shipping Form
How This Island Leaves The Factory
Store fixtures are light for their size, so a container fills up on volume long before it fills up on weight. What decides your freight is not what one unit weighs — it is what shape the goods are in when they go through the container door. Everything we build leaves in one of three shapes, and a bulk island is the one that travels best.
Flat Packed Cabinet And Shelving Panels
Shelving bays, produce islands and bulk cabinets travel as panels — uprights, shelves, back panels and plinths, strapped flat with bubble wrap on every component. They are built up on the shop floor, so the packing list and the assembly drawings travel with the goods.
This model
Nested Trolleys And Hand Baskets
Trolleys slide into one another and baskets stack. Past the first unit, each extra one adds only its nesting pitch instead of its full length, so the shipped volume ends up a fraction of what the unit count suggests.
Fully Assembled Counters
A checkout lane is welded, coated and fitted out as one piece, so it is crated whole with padding on the steel. Nothing waits to be assembled at the store beyond levelling it into the lane, and the crate is the counter plus a margin.
Because this island ships as panels rather than assembled, the container arithmetic runs on panel count instead of on finished size — which is why two islands of the same footprint can load very differently depending on how many compartments each one carries. We do not publish a units-per-container figure for that reason. It is worked out against your actual order and comes back on the packing list together with the case dimensions, once the island size is confirmed.
Ships With
What Usually Travels In The Same Container
A bulk island rarely arrives on its own. These three categories share the dry goods aisle with it, and putting them on one order is what lets a single colour reference run across the whole aisle, because it is then one batch of coating rather than three.
Grain & Rice Racks
Loose grain and loose dry goods almost always share an aisle, and both want stainless wherever a scoop lands. Ordering them together keeps the two halves of the aisle in one timber.
See grain racks
Steel & Wood Shelving
The bays that run behind and alongside a bulk island are what a shopper sees while standing at it, so they carry the same colour and the same board tone.
See shelving bays
Promotional Display Stands
Loose lines are promoted constantly, and a 1000 mm promotion square at the head of the aisle is the cheapest way to push one without rebuilding the island.
See retail display tablesHow many of each a store needs is a floor area question rather than a product question, and it is answered store by store on the equipment lists by store size.
Send a plan or a photograph of the run you need and we will price it against your opening date.
- Emailkeshun@kssyt.com
- Phone / WhatsApp+86 13222226666
Get A Quotation
Get a Quotation For Bulk Food Bins
Tell us the store size and the finish you need; our engineers reply with a counted list.
Buyer Questions
Questions Buyers Ask Before Ordering
The ones that come up on nearly every enquiry for this category.
Q01 How do I choose between three, four and five rows?
Count your loose lines and measure the aisle width. Three rows suits a short range or a narrow aisle, five suits a wide range on a tight floor, and four is where most stores land. Send both numbers and we will tell you which one we would build.
Q02 Is pale timber harder to keep clean than dark?
It shows marks sooner, which is a fair objection. Everything is plastic powder coated and protected against damp, so it wipes down the same way — but a pale island in a high traffic aisle wants wiping more often than a dark one, and that is worth knowing before you specify it.
Q03 Can the bins be different depths along the same row?
Yes. Compartment width and depth are set per bin rather than across the row, which is how a range with both a fast staple and a slow speciality line ends up on the same fixture without either one looking wrong.
Q04 What is supplied with the island?
Ticket holders are fitted and price tickets are supplied with the order. Everything ships flat packed as panels with bubble wrap on each component, labelled with type, title, quantity and manufacturer so the site crew can sequence the build.